Pneumatic and Manual strapping tools

Pneumatic and Manual strapping tool

We offer high-quality affordable manual and pneumatic strapping tools for PET (polyethylene) and PP (polypropylene), textile, composite and steel straps for all kinds of strap widths. Pneumatic and manual banding tools have ISO, CE, and other needed certificates.

Cart Dispenser – Strapping trolley

We offer a high-quality Cart Dispenser for PP/PET on wheels and affordable cart dispensers (Industrial strapping carts) for textile and composite/corded straps. Same cart dispensers have wheels, however, they are very stable and they have different inner diameters Ø. Either 400mm or 200mm.

Wire buckets, Clips, Clamps

We offer a huge range of wire buckets, clips for textile or composite straps. Wire buckets are galvanized, wide from 13mm till 25mm. Additionally, we offer seals, clamps for plastic PP straps for packing with the manual strapping tool.

Manual strapping tool PPST-13

Manual strapping tool for PET, PP, textile, and composite/corded and steel band

Manual strapping tools are high-quality manual strapping tools for PP strapping.  The structure is simple and the durability of the manual strapping tool is high. The replacement parts are simple and convenient to change if needed.  The hand-packing tools are extremely lightweight, it weighs only between 1 – 5 kgs. Hand strapping tool tensioning the strap, deformation buckle, and cut the strap to finish the packing process. We sell different Manual strapping tools for plastic PET or PP strapping, for textile & composite/corded strapping, and for steel strapping.  Manual strapping tools are suitable for different strap widths. Therefore, when selecting which strapping tool you need first to determine which strap width will be strong enough to carry your goods.

 

Pneumatic strapping tool

AIR19 pneumatic strapping tool 13-19mm (1/2" to 3/4") banding tool for plastic PET and PP strapA pneumatic strapping tool sometimes called an air hand strapping tool, is an important tool for a wide variety of workshops, factories, and industrial plants. The pneumatic tool operates using compressed air provided by the air compressor. As a rule, the compressor operates according to the principle of decreasing air volume or air acceleration.

The most commonly used is piston compressors. The pneumatic tool is an excellent choice for carrying out tasks that require precision, at the same time it is the best strapping tool for smaller and more difficult accessible spaces and places that cannot be accessed with larger devices. Therefore, various industries are increasingly using pneumatic tools. The pneumatic banding tool is generally ergonomic and practical, it is a user-friendly hand banding tool in terms of usability and comfort.

 

Price of the pneumatic strapping tool

Pneumatic strapping tools are accessible tools and are not that expensive, compared to other strapping tools and machines. A good pneumatic hand tool is available for less than a thousand euros. The price is highly correlated with the quality of the air strapping tool and it also depends on strength of the pneumatic tool.

 

New pneumatic strapping tool

New pneumatic strapping tools are extremely high in quality and available at a good price with a 12-month warranty. Suitable for both PET and PP tape. Pneumatic banding tools are used in all industries and are indispensable tools for packaging. Pneumatic strapping tools save time and increase the efficiency of packaging. The pneumatic strapping tools are modern, lightweight, reliable, and ergonomic. With a pneumatic banding tool, you can fasten PET and PP and steel straps; different thicknesses and widths.

 

How to use a pneumatic strapping tool?

  • Bundle the package with a plastic strap and put one end of PET or PP strap above another.
  • Insert both upper and lower parts of the packing belt into the pneumatic strapping machine.
  • Then, press the tightening button with the thumb of the right hand till the packaging belt is tightened fully.
  • Then press the fusion button with the thumb of right hand till the packaging strap is fused and cut off.
  • Press the handle and tighten with the right hand.
  • Press the rewinding button with the little finger of the right hand till the strap is released from the take-up pulley.
  • Press the handle and tighten the button tightly and remove the tool from the packing strap.

 

How to adjust the time of friction fusion of pneumatic strapping tool

AIR19 pneumatic strapping tool 13-19mm (1/2" to 3/4") banding tool for plastic PET and PP strapThe time of friction fusion can be adjusted according to the dimension of the packaging strap, the quantity of air pressure, and the condition of the pneumatic strapping tool. For this reason, a small screwdriver is used to adjust the small screw below the fusion button. The time will increase if rotating clockwise and decrease if rotating anticlockwise. Tighten the lock nut after adjustment. Sound fusion can ensure smooth and burr-free joints.

 

Pneumatic strapping tool vs battery strapping tool

The pneumatic tool is easier and stronger compared to electric, which means that it performs exactly the same job as an electric tool, but uses a lighter and handier tool. Pneumatic tools are more economical and safe to use; therefore, it is used in the automotive industry, the construction industry, and the metal industry.

The costs of energy consumption are considerably lower when using a pneumatic tool than with the use of an electric one. In order to produce a certain amount of kinetic energy, the compressor consumes considerably less electricity than the power tool consumes. The pneumatic tool has a longer lifetime.

Even long-term and everyday use do not harm the tool. As the pneumatic tool does not work with the engine, it does not overheat and cannot be overloaded. Therefore, maintenance is not necessary. The pneumatic tool is safe and doesn’t pose any risk of electric shock or explosion. They are also suitable for use in damp or wet environments. However, in order for the pneumatic strapping tool to work, access to compressed air is needed, therefore it’s not that mobile and practical as a battery strapping tool.

 

batterystrapping.com-wire-buckets-textile-composite-strapping-16mm-19mm-25mm.jpg

Wire buckets, Clips, Clamps for textile/composite strapping

High-quality wire buckets, clamps for textile or composite strapping, galvanized. Different wide: 16mm, 19mm, or 25mm. We offer a discount based on quantity.

 

Seals, Clips, Clamps for plastic PP strapping 13mm or 16mm priceSeals, Clips, Clamps for plastic PP strapping 13mm or 16mm

High-quality Seals for plastic PP strapping, 13mm, and 16mm, galvanized, 1000 pcs/sales unit or 1500 pcs/sales unit. We offer a discount based on quantity.

 

High-quality PET/PP strap dispenser cart - 405/406

Cart Dispenser for PP/PET strap  – Industrial Strapping Cart for polypropylene (PP) and polyester (PET)

  • High-quality Cart Dispenser for PP/PET,
  • with wheels,
  • very stable with a total weight of around 28kg,
  • size: 65×48×110cm,
  • the inner diameter 400mm PET/PP strap.
You've just added this product to the cart: