ATOM Battery Powered Strapping Tool 10-16mm (3/8″-5/8″) for PET/PP Strap + Battery + Charger
- Battery Powered Strapping Tool ATOM for PET/PP Plastic Strap wide 10-16mm
- LED digital liquid crystal display
- Plastic strap width 10-16mm, thickness 0.5-1.2mm
- Battery capacity: 4000 mAH 50/60HZ 75W, which can perform up to 700 strappings with one charge
- Sealing tape form: friction hot melt bonding
- Adjustable tightening force: 400-3800N
- Battery Powered Strapping tool ATOM + Battery + charger + convenient box for carrying the strapping tool
ATOM Battery Strapping Tool 10-16mm (3/8″-5/8″) for PET/PP Strap + Battery + Charger
Premium Battery Strapping Tool for PP and PET Plastic Strap ATOM with LED digital liquid crystal display can be used for strapping packages, pallets, steel, timber, brick, fiber, and so on. The Electric Strapping Tool ATOM is fully automatic, but it is also possible to operate in semi-automatic or manual mode. Battery Strapping Tool ATOM weighs only 4kg and its dimensions are 330 * 150 * 140mm. It can be used with plastic PET and PP straps which are 10-16mm wide and thick between 0,5-1,2mm and it can perform vertical and horizontal strapping. Electric strapping tool ATOM uses the latest strapping technology which is based on Friction Welding and ensures that plastic straps are strongly glued together. Tension force can be adjusted from 400 up to 3800N. The maximum force is sufficient to strap pallets, wood, steel, or other heavy objects. With Battery powered strapping tool ATOM you receive a rechargeable battery with a capacity of 4000mAH. With one charge, which takes approximately 90 minutes Battery strapping tool ATOM can perform up to 700 strappings. With an Electric strapping tool, you will speed up the packaging process, reduce packing cost by more than 15% and improve the combining intensity about 2 times. Further, since for packing you won’t need metal buckles, you will improve the packing process and reduce the costs of packing material. The battery strapping tool has an alarm device for the low power and light signal when strapping is finished. It works normally under a large number of dust, tiny fiber, and other abominable environments with the exceptive dust-proof filter screen. ATOM is lightweight and can be used with a single-hand. This battery banding tool is also designed to deliver a high-grade friction weld seal. With the Battery-powered Banding tool ATOM, you will receive a powerful battery, a charger, and a convenient box for carrying the strapping tool. It has a 12-month warranty and service is available in the European Union.
Specification of Battery Strapping Tool ATOM 10-16mm or PET/PP Strap:
|Apply straps Width||10-16mm|
|Apply straps Thickness||0.6-1.2mm|
|Rechargeable Battery||Lithium battery 18V/5.0Ah|
|Charger time||Charger 90minutes can strap 700 loops|
|Battery(Optional)||LG cell battery / Bosch battery|
|Apply straps size||PP/PET|
|Maximum tension force （N）||4000N|
|Tighten speed （m/min）||11m/min|
|Welding time （s）||1.1-1.4s|
|Cooling time(S)||2.5 s (adjustable)|
|Control system||Button + Digital display|
|Module selection||Full automatic.semi-automatic,manual|
|Gear selection||PP strap: 1-3 gear PET strap: 4-9 gear|
|Machine characteristics||Energy-saving and environmental protection, Simple operation, Large battery capacity|
|Machine weight: N.W/G.W||4.0Kg|
|Whole machine dimension LXWXH(mm)||330x150x140mm|
|Packing dimension LXWXH(mm)|
Automatic, Semi-automatic and Manual mode – Battery Strapping Tool ATOM
In Automatic mode all the operator needs to do is to press the tension button for a short time, and the strap will be automatically tightened. When the set tension value is reached, the strap will be welded and cut automatically.
In the Semi-automatic mode, it is necessary to press and hold the tension button all the time. When the set tension value is reached, the machine will start automatic welding and cutting (if the take-up button is released during tightening, the tension wheel will stop rotating. Operator can press the welding button at this time, and the baler will weld and cut the strap.)
When manual mode is used, the tension button shall be pressed all the time. When the desired tension is reached the fusion button must be pressed so the welding begins. When welding is done, the strap must be cut manually.
How does Battery Strapping Tool ATOM work?
First, the operator needs to wrap the strap around the object which needs to be strapped. Then both ends of straps need to be placed on each other, as shown in the picture. The operator then needs to insert the straps in the Battery strapping tool in a way that he lifts the handle with his right hand and insert the straps with his left hand so that the straps are stack horizontally and then release the handle. Then the tension button needs to be pressed. In manual mode, the tension button needs to be pressed until the indicator light is purple. In Automatic and semi-automatic mode tension button needs to be only pressed briefly. Then the straps are welded automatically. After the welding is completed, the buzzer rings for 3 seconds and stops. Only then the operator can lift the battery strapping machine to the right side.
Battery Strapping Tool ATOM Price
Although the battery strapping tool ATOM is made of high-quality materials, it can be used for PET and PP straps which are wide between 10-16mm and comes with a very powerful Lithium battery (4000mAh) which can perform 700 strappings in one charge, and has an LED digital liquid crystal display, the price of it is still very affordable. We can say that it is the most affordable battery strapping tool with these characteristics on the market. However, the price of the battery strapping tool does not reflect on the quality. Despite it is affordable, the banding tool is made out of high-quality hard plastic and it has implemented the latest welding technology. The maximum tension force is 3800N and can be adjustable. With one single charge battery strapping tool ATOM can produce more than 700 strapping.
Battery Strapping Tool ATOM Video