Ships from EU warehouse · est. delivery 8–11 working days

SKU: 260300

Original price was: 3.530 €.Current price is: 2.899 €.

Price excl. VAT • VAT is added at checkout if no validated VAT number is entered

In stock

🔒 Secure checkout • PCI‑DSS compliant

    • VAT-free for EU businesses With a valid VAT ID from another EU country
    • CE-compliant Machines from ISO-certified manufacturers
    • Secure payment Card, PayPal or bank transfer
    • Fast delivery Ships from EU warehouse · est. delivery 8–11 working days
    • 12-month warranty Register it in the customer portal · service and spare parts from us
    • Returns and complaints No fee if the product is faulty, damaged in transit or not as ordered

    10,000+ products sold across Europe 30+ years of team experience

    AS600F vertical band sealer

    AS600F vertical continuous band sealer with the conveyor tableAS600F is a heavy-duty vertical band sealer. The bag stands upright on its own conveyor table and the belts pull the mouth through a heated block, a press wheel and a cooling block, so the seal is closed and set before the bag reaches the end of the machine.

    It is built for bags that a table sealer cannot take: the conveyor carries 20 kg in total and 5 kg per bag, and the sealing height is adjustable from 120 to 600 mm, so a small pouch and a 60 cm sack run on the same machine.

    The AS600F is designed for continuous operation, allowing one filled bag to follow another without interruption. The operator places each bag upright on the conveyor, ensuring the mouth is straight and free of product residue before sealing. The conveyor guides the bag through the sealing process, so manual support is not needed during operation.

    Sealing parameters such as temperature and belt speed are set to match the film type and thickness, with the temperature raised gradually, because a big step at once burns the film and the belt. The conveyor table height is set with the handwheel so that the seal sits 10 to 20 mm from the edge of the bag. The operator monitors seal quality, conveyor alignment, and bag position throughout the process.

    AS600F band sealer, control panel with the temperature controllerThe seal is 13 mm wide. Wide enough to carry a full sack, and the embossing wheel rolls a stripe or mesh pattern into it. The belts run at 0 to 15 m/min and the temperature is set between 0 and 300 °C.

    The machine measures 1195 × 500 × 1245 mm, weighs 190 kg and runs from 220 V / 50 Hz, with a 120 W drive motor and 400 W × 2 of heating. The panel has an emergency stop, a fan switch and a separate heating switch.

    Where the AS600F vertical band sealer is used

    The AS600F vertical band sealer is used in food processing, agriculture, chemicals, pharmaceuticals and consumer goods industries. It is chosen for packaging dry foods, powders, seeds, granulates, medical supplies, and industrial parts. Typical users include manufacturing plants, contract packers, and distribution warehouses that require consistent sealing for medium to high production volumes.

    The machine is integrated into production lines where bags are filled and then sealed in sequence. It is suitable for operations where bags must stand upright and be sealed quickly, such as in packaging of rice, flour, fertilizer, animal feed, resins or hardware in bags of up to 5 kg.

     

    Technical specifications

    Model AS600F (FRL600NA/S)
    Type Heavy-duty vertical continuous band sealer
    Sealing width 13 mm, embossed
    Sealing speed 0–15 m/min, adjustable
    Temperature range 0–300 °C, adjustable
    Conveyor load 20 kg in total, 5 kg per bag
    Bag sealing height 120–600 mm, adjustable
    Film thickness 0,04–0,20 mm, single layer
    Supply voltage AC 220 V / 50 Hz
    Motor power DC 24 V, 120 W
    Heating power 400 W × 2
    Ambient temperature 5–30 °C
    Machine size (L × W × H) 1195 × 500 × 1245 mm
    Machine weight 190 kg
    Warranty 12 months

     

    AS600F band sealer on video

     

    What this machine does that a table sealer cannot

    • Heavy bags. 20 kg on the table and 5 kg per bag: sacks of granulate, powder or parts that a table machine cannot hold.
    • Bags from 120 to 600 mm. The sealing height is adjusted with a handwheel, so the same machine closes a small pouch and a 60 cm sack.
    • A 13 mm seal. Wide and embossed, which is what holds when a full sack is lifted by the top.
    • It sets the seal. After the heated block the bag goes through a cooling block, so the seal is firm when the bag leaves the machine, not minutes later.
    • Continuous work. The belts run at 0 to 15 m/min and one bag follows another without stopping.
    • Made for a packing room. Emergency stop, separate heating and fan switches, 0–300 °C controller, and an ambient range of 5 to 30 °C.

    Operation and workflow with the AS600F vertical band sealer

    The operator places filled bags upright on the conveyor, ensuring the mouth is straight and free of product residue. The conveyor guides the bag through the sealing process without manual support. The operator monitors the seal quality, conveyor alignment, and bag position. For best results, the sealing temperature and speed are set to match the film type and thickness.

     

    Equipment

    • Heavy-duty vertical continuous band sealer, model FRL600A
    • Sealing width 13 mm, embossed
    • Sealing speed 0–15 m/min, adjustable
    • Temperature 0–300 °C, adjustable
    • Conveyor load 20 kg, 5 kg per bag
    • Bag sealing height adjustable 120–600 mm
    • Single-layer film 0,04–0,20 mm
    • Supply AC 220 V / 50 Hz, motor 120 W, heating 400 W × 2
    • Emergency stop, power, heating and fan switches
    • Machine 1195 × 500 × 1245 mm, 190 kg
    • Ambient 5–30 °C
    • 12-month warranty

     

    How a bag is sealed

    1. Switch the machine on, turn on the heating and set the sealing temperature for your film.
    2. Set the height of the conveyor table with the handwheel, so the seal sits 10 to 20 mm from the edge of the bag.
    3. Set the belt speed with the knob; slower belts put more heat into the seal.
    4. Feed the filled bag upright, with the mouth between the two sealing belts.
    5. The bag runs through the heated block, the press wheel, the cooling block and the embossing wheel, and comes out sealed.

     

    Settings and maintenance

    • Temperature. Raise it slowly from low to high until the seal holds. A big step at once burns the film and the belt.
    • Speed. 0 to 15 m/min. Set the temperature first and the speed after it.
    • Table height. Adjusted with the handwheel so the seal sits 10 to 20 mm from the edge of the bag. Keep the conveyor belt tight while adjusting.
    • Fan. Switch it on for film that needs to cool faster; it can stay off for thin bags.
    • Daily. Brush the film residue off the sealing belt and wipe the conveyor table. The motor must run without unusual noise.
    • Monthly and yearly. Check the sealing belt and the toothed guide belt for damage every month; replace the motor carbon brush once a year.

    Choosing and preparing for the AS600F vertical band sealer

    Before selecting the AS600F, check the bag type, film material, and production flow. The machine is suited to PE, PP or multi-layer film within the specified thickness range. Bags must be able to stand upright and fit within the height and weight limits. For lines with variable bag sizes, the conveyor height is set with the handwheel.

    Common mistakes include running the machine with the wrong temperature for the film, setting the conveyor too high or low for the bag, or overloading the conveyor. To avoid downtime, keep spare sealing belts and motor brushes on hand, and train operators to recognize signs of wear or misalignment.

     

    Before you order

    AS600F vertical band sealer in a packing roomThe price is on this page. A band sealer is bought for the bag and the pace, so check these before you order:

    • Bag weight. 5 kg per bag and 20 kg on the table. For light bags up to 3 kg, FS150 is smaller and cheaper.
    • Bag height. 120 to 600 mm, set with the handwheel.
    • Film. 0,04 to 0,20 mm in a single layer, PE, PP or multi-layer.
    • Printing. This model seals and embosses. For a printed date or batch code, F150PM has an inkjet printer.
    • Space and floor. 1195 × 500 × 1245 mm and 190 kg, plus room to feed and take off the bags.
    • Supply. AC 220 V / 50 Hz from an earthed socket; ambient 5 to 30 °C.

    Additional information

    Weight 220,0 kg
    Dimensions 1,23 × 0,58 × 1,43 m
    Parameter Specification
    Supply voltage

    AC220V / 50Hz

    Motor power

    DC24V 120W

    Heating tube power

    2 × 400W

    Sealing width

    13 mm

    Sealing speed

    0 – 15 m/min

    Temperature range

    0 – 300°C adjustable

    Film thickness

    0.04 – 0.20 mm (single layer)

    Maximum conveyor load

    20 kg (5 kg per bag)

    Adjustable bag height

    120 – 600 mm

    Machine dimensions

    1195 × 500 × 1245 mm

    Net weight

    85 kg

    What types of films can the AS600F Vertical Band Sealer handle?

    It works with LDPE, HDPE, PP, and laminated films, making it versatile for various packaging needs.

    What is the maximum sealing speed of the AS600F Vertical Band Sealer?

    The sealing speed can reach up to 15 meters per minute, suitable for high-volume production.

    How does the temperature control system work on this sealer?

    It features electronic constant temperature control, ensuring precise and consistent sealing results.

    What is the adjustable temperature range for sealing?

    The temperature can be adjusted from 0 to 300°C to accommodate different film types and thicknesses.

    What film thickness can this sealer accommodate?

    It supports film thicknesses ranging from 0.04 to 0.20 mm.

    What is the maximum conveyor load capacity?

    The conveyor can handle loads up to 20 kg, ideal for heavy packaging applications.

    What is the sealing width of the AS600F?

    It provides a 13 mm sealing width, ensuring strong and durable closures.

    What bag heights can the sealer adjust to?

    The bag height is adjustable from 120 mm to 600 mm, accommodating various package sizes.

    Is the AS600F suitable for continuous industrial use?

    Yes, its heavy-duty design and stable 85 kg net weight support reliable, continuous operation.

    What are the machine dimensions and how does this impact installation?

    The compact size of 1195 × 500 × 1245 mm allows for easy integration into existing production lines.

    Summary

    • AS600F Vertical Band Sealer with industrial heavy duty design
    • Works with LDPE HDPE PP and laminated films
    • Electronic constant temperature control ensures precise sealing results
    • Sealing speed up to 15 meters per minute
    • Adjustable temperature range from 0 to 300°C
    • Handles film thickness from 0.04 to 0.20 mm
    • Supports 20 kg conveyor load capacity for heavy packaging
    • 13 mm sealing width for strong and durable closures
    • Adjustable bag height 120 to 600 mm
    • Compact size 1195 × 500 × 1245 mm
    • Net weight 85 kg ensures operational stability
    • Fast Delivery - One Year Warranty

    Compliance

    EU Warranty

    Product Documents

    Technical Datasheet (PDF)

    Sign in to download the full technical datasheet.

    User Manual (PDF)

    Accessible to registered customers. Versioned & tracked.

    Product Certificates (PDF)

    Sign in to download the full datasheet and CE certificate.

    AS600F Vertical Band Sealer

    AS600F Vertical Band Sealer - 13mm Seal Width, 0–15m/min, 20kg Load - Bag Height: 60cm

    Original price was: 3.530 €.Current price is: 2.899 €.

    In stock

    In stock

    We Provide High-Quality Goods All Across Europe

    Explore where our products are being used by customers throughout Europe.