Paper strapping machines, bands and tape

Paper strapping in this category covers banding machines for paper or OPP band, paper strap in three widths and kraft paper tape for closing cartons. You find machines that put a single band around a bundle, the band they take, a paper strap and tape.

The three banding machines are ECOBAND-S for 12 mm band with a 220 x 170 mm frame, ECOBAND-B4620 for 30 mm band (20 mm optional) with a 460 x 200 mm arch, and ECOBAND-A for 20 or 30 mm band with a 460 x 200 mm arch on its own stand.

Choose your paper strapping machine by band width, frame or arch size and if you need a table machine or one with a belt. A comparison table of the three machines is below the product grid.

How paper banding works on these machines

On these machines, paper banding means placing one band of paper or OPP film around a bundle or stack. The band is pulled to a set tension of up to 5 kg and closed automatically.

The frame or arch of the paper banding machine sets the largest bundle you can strap. For example, ECOBAND-S has a 220 x 170 mm frame and ECOBAND-B4620 and ECOBAND-A have a 460 x 200 mm arch.

To use these machines, place the bundle in the frame of the ECOBAND-S or under the arch of the ECOBAND-B4620 or ECOBAND-A. On the ECOBAND-A, a belt carries the product under the arch, and a top press holds it steady while the band is applied. This setup helps keep stacks aligned and prevents movement during banding, which is important when working with light or uneven items on a packing line.

The machine feeds the band around the bundle and pulls it to the set tension, up to 5 kg. You should set the tension using a test bundle: pull enough to hold the stack together, but not so much that it dents the edges of soft or printed goods. If the tension is too high, you may see crushed corners or marks on the product. If it is too low, the band may slip and the bundle can come apart during handling.

The bundle must fit inside the frame or arch and must be at least as wide as the smallest object the machine can handle: 30 mm on the ECOBAND-S, 50 mm on the ECOBAND-A, and the ECOBAND-B4620 can take packages from 30 × 10 mm. Each cycle puts one band around the bundle. For a second band in a different position, move or turn the bundle and run another cycle. The band comes on rolls that sit on the machine. On the ECOBAND-B4620, an external dispenser column can take larger rolls up to 380 mm across, which means fewer roll changes in a busy warehouse.

Choosing a banding machine for your packaging line

The ECOBAND-S is a small desktop banding machine for 12 mm paper or OPP band, with a 220 x 170 mm frame. The ECOBAND-B4620 is a table banding machine for 30 mm band (20 mm optional), with a 460 x 200 mm arch and an external dispenser for large rolls.

The ECOBAND-A is a paper banding machine on its own stand, takes 20 or 30 mm band, and has a belt that carries the product under the arch and a top press. All three machines run on a single-phase supply.

The first step is the band width. The ECOBAND-S takes a 12 mm band, which suits small stacks and bundles such as packs of cards or leaflets. The ECOBAND-B4620 takes a 30 mm band as standard, with a 20 mm option, for larger and wider packs. The ECOBAND-A takes 20 or 30 mm band, for medium and larger bundles.

The largest bundle you can strap depends on the frame or arch. The ECOBAND-S has a 220 × 170 mm frame, while the ECOBAND-B4620 and ECOBAND-A have a 460 × 200 mm arch. The ECOBAND-B4620 can take packages up to 473 × 206 mm and can hold goods up to 30 kg on the machine. If your bundles are close to these limits, measure them before choosing a model. For example, on a production floor with mixed carton sizes, the larger arch of the ECOBAND-B4620 or ECOBAND-A gives more flexibility.

Where the machine stands affects the workflow. The ECOBAND-S sits on a table, with a working height of 215 mm, which is suitable for manual packing stations. The ECOBAND-B4620 is also a table machine, with its dispenser column, and a working height of 245 mm. The ECOBAND-A stands on its own castor-mounted stand at 600 mm, with a belt to carry the product and a top press to hold it. Output is 26 bands a minute on the ECOBAND-S and ECOBAND-B4620, and 20 a minute on the ECOBAND-A. The real output depends on how fast the operator loads the bundles. The ECOBAND-A has a touch screen for settings and a production counter that adds up and can be reset, which helps track daily output in a warehouse.

ECOBAND-S, ECOBAND-B4620 and ECOBAND-A comparison

Below is a comparison table of ECOBAND-S, ECOBAND-B4620 and ECOBAND-A. It shows the band width, frame or arch size, output and other key facts for each machine.

To read the comparison table, start with the band width and the frame or arch size, as these set which bundles you can run. Next, check the smallest object each model can handle and the roll core size: the ECOBAND-S and ECOBAND-B4620 take a 40 mm core, while the ECOBAND-A takes a 76 mm core. Where the machine stands is also shown: on a table or on its own stand. These details help match the machine to your packaging line, whether you need to band small stacks on a table or larger bundles on a stand with a belt.

Paper band widths and rolls for each machine

Paper band and OPP band are available in the shop. The ECOBAND-S takes 12 mm band with a 40 mm core, ECOBAND-B4620 takes 30 mm band as standard with a 40 mm spool core, and ECOBAND-A takes 20 or 30 mm band with a 76 mm core. The OPP band 12 mm fits the ECOBAND-S.

Paper band in the shop comes in 12 mm width, 150 m a roll, with a 40 mm core and 100 rolls in a box. The 30 mm paper band is also 150 m a roll, with 56 rolls in a box. OPP band is available in 12 mm width, 150 m a roll, and 100 rolls per box. The 12 mm paper band and OPP band fit the ECOBAND-S, while the 30 mm paper band fits the ECOBAND-B4620 as standard.

The core of the roll must match the holder on the machine: 40 mm on the ECOBAND-S and ECOBAND-B4620, and 76 mm on the ECOBAND-A. If the core does not fit, the roll will not sit correctly and the band will not feed. On the ECOBAND-S and ECOBAND-B4620, the roll can be up to 160 mm across. The ECOBAND-B4620 has an external dispenser that takes rolls up to 380 mm, which means fewer stops for roll changes during long runs.

Keep paper band dry in its box until it is used, as paper loses strength when wet. In a warehouse, store the boxes of band off the floor and away from damp areas. Order the band together with the machine, in the width and core size the machine takes, so you can begin banding on the first day without waiting for supplies. This avoids delays when setting up a new packing line.

Paper strap and kraft paper tape for packaging

The paper strap comes in 9 mm, 12 mm or 15 mm widths for light to medium duty, such as bundling light items and cartons. It loses strength when wet.

Kraft paper tape is self-adhesive, 50 mm wide, and fits any carton sealer in the shop. Each box contains 72 rolls. Use kraft paper tape for closing cartons by hand or in a carton sealer.

In a warehouse that packs dry goods, a 12 mm paper strap can hold small cartons together for internal transport. Keep it dry: a strap that gets wet can break during handling.

Banding and paper strap hold a bundle together; they do not secure a heavy load on a pallet, which is what plastic or steel strapping is for. The kraft paper tape comes as 50 m rolls, 72 in a box, 3600 m of tape in all. It is water-resistant but not waterproof and holds less well in very hot or very cold conditions, so store it indoors and use it on dry cartons.

When banding is right for paper strapping

Paper strapping holds stacks or bundles with a light, even pull. A banding machine like ECOBAND-S, ECOBAND-B4620 or ECOBAND-A pulls the band with a tension of up to 5 kg. This is enough to keep soft, printed or stacked goods together without crushing them. Typical banded goods include stacks of printed matter, envelopes, leaflets, trays or boxes, and bundles of produce.

Paper strapping is not meant for heavy pallet loads. For that, plastic or steel strapping is used. Banding with paper or OPP film is for light to medium duty, such as holding together bundles that need to stay in place during handling, but not for securing heavy items for transport on pallets.

In a print shop, for example, stacks of brochures are banded for delivery; on a packing line, trays of small boxes are held together with a single band so they are easier to handle.

In practice, you may need to adjust the tension for different products. For example, a stack of envelopes may need less tension than a bundle of plastic trays. Always check the first few bundles after a change in product or band to make sure the tension is set correctly. This helps prevent mistakes that could lead to damaged goods or loose bundles on the production floor.

Paper or OPP band: recycling and product visibility

Paper strapping with a paper band can go into paper recycling with the carton or paper goods. OPP band is a plastic film band. If you use a clear OPP band, the product underneath stays visible. Both types of band fit the ECOBAND-S, ECOBAND-B4620 and ECOBAND-A, as long as the width and core size match the machine.

Paper loses strength when it gets wet, so paper strapping suits dry goods and dry storage. OPP band does not lose strength with moisture. Choose paper band for goods that go to paper recycling and OPP band when you need a clear film or resistance to moisture.

When you choose between them, think of the end use and the storage: paper band for goods that go into paper recycling with the carton, OPP band when the product should stay visible or when the goods may meet damp air in storage or transport, as trays of food on a humid packing line can.

What affects the price of a banding machine

The price of a banding machine depends on the band width it takes, the frame or arch size, the output in bands per minute and the construction: a desktop machine, a table machine with a dispenser column, or a machine on its own stand with a belt and a top press. The current price is shown on each product card.

The main running cost is the band, which is bought by the box: 100 rolls of 12 mm paper band, 56 rolls of 30 mm paper band, or 100 rolls of 12 mm OPP band. On each product card, you find a Get offer button for a quote, for example, if you want a machine with a stock of band, and an Add to inquiry button to collect several products into one request. This helps you plan your purchase and stock for your packaging line.

What to check before ordering paper strapping

Before ordering a paper strapping machine, check the size of the largest and smallest bundle you need to band. The bundle must pass through the frame or arch and be at least as wide as the smallest object the machine can handle. For example, the ECOBAND-S needs a minimum object width of 30 mm.

Check the band width, whether you need paper or OPP band, and how many bundles per minute you need to process. Decide if you want a table machine or one on its own stand. All three machines run on a single-phase supply. The comparison table above shows which model fits your requirements.

Try the machine settings on your own bundles with the band you plan to use. Set the tension on a test bundle: enough to hold the stack, but not so much that it dents the edges. For example, in a warehouse packing printed brochures, start with a lower tension to avoid marks, and increase it only if the bundles do not stay together.

Mistakes can happen if the bundle is too large for the frame or arch, or if the band width does not match the machine. If the band is too narrow or too wide for the holder, it will not feed correctly. If the tension is set too high, soft products may be damaged. If it is too low, bundles may come apart during handling. Check these points before running a full batch to avoid wasted material and time.

Questions about paper strapping

Which band fits which banding machine?

The ECOBAND-S takes 12 mm band with a 40 mm core. ECOBAND-B4620 uses 30 mm band as standard (20 mm optional) with a 40 mm core. ECOBAND-A takes 20 or 30 mm band with a 76 mm core.

Can I use paper or OPP band on these machines?

All three machines, ECOBAND-S, ECOBAND-B4620 and ECOBAND-A, can use either paper band or OPP band in the correct width and core size.

How many bundles per minute can these machines process?

ECOBAND-S and ECOBAND-B4620 can process up to 26 bands a minute. ECOBAND-A can process up to 20 bands a minute.

What is the largest bundle I can strap?

The largest bundle depends on the frame or arch size. ECOBAND-S has a 220 x 170 mm frame. ECOBAND-B4620 and ECOBAND-A have a 460 x 200 mm arch.