SMARTWRAP X2 Stretch Wrapping Machine with Scale and Printer | 2000 kg, up to 3000 mm wrapping height

SMARTWRAP X2 pallet wrapper with a scale and a label printer

SMARTWRAP X2 is a turntable pallet wrapper with a scale and a label printer: the pallet is put on the turntable with a stacker or a pallet truck, the machine weighs the load and wraps it in stretch film in one cycle, and the operator does not walk around the pallet with a roll of film.

The machine is configured for your pallets: turntable 1500, 1650, 1800, 2000 or 2200 mm and wrapping height 2200, 2600 or 3000 mm. Every version carries up to 2000 kg and wraps up to 30 pallets an hour. The column is only 2000 mm high for a 2200 mm wrap, so the machine goes under a low ceiling.

The film is stretched mechanically between the rollers as it goes on the load, so the wrap holds without the operator pulling the roll by hand.

The built-in scale weighs the load while it is wrapped, so a separate weighing station is not needed. The label printer prints the weight straight onto a label, so the pallet leaves the machine weighed, wrapped and labelled in one cycle.

Where the SMARTWRAP X2 is used

The SMARTWRAP X2 is used in warehouse, logistics and production environments that dispatch palletised goods and require weight capture at the point of wrapping. It is suited to shipping and dispatch areas, distribution centres and manufacturing lines where each pallet must be stabilised, weighed and labelled before leaving the floor.

This pallet wrapper is chosen for operations that handle a steady mix of standard and oversized pallets, including heavy, dense or mixed loads.

Technical specifications

What the pallet wrapper does for your dispatch

• Weighing and wrapping in one cycle. The scale is under the turntable, so the pallet is weighed where it is wrapped, no weighbridge, no second handling.
• Film held at an even tension. Mechanical stretch keeps the film tight on the load, cycle after cycle, without the operator holding the roll.
• The weight is printed on a label. The label goes straight onto the pallet, which is what a carrier or a warehouse asks for.
• Made to your pallets. Five turntable diameters and three wrapping heights, the machine is ordered for the load you really have.
• Set once, repeated by anyone. Six programs on the touch screen and a one-button start, so every shift wraps the same way.
• It knows how high the load is. A SICK photoelectric sensor finds the top of the pallet, so the film is not wrapped into the air above it.

Turntable, film carriage and controls

• Turntable 1500, 1650, 1800, 2000 or 2200 mm
• Wrapping height 2200, 2600 or 3000 mm
• Maximum load 2000 kg, turntable 81 mm high
• Built-in scale and label printer
• Mechanical stretch
• Stretch film 500 mm wide, 14 micron, on a 76 mm core
• Turntable 0–12 rpm and film carriage 0–5.9 m/min, both adjustable
• Up to 30 pallets an hour
• Touch screen, 6 wrapping programs, one-button start
• SICK (Germany) photoelectric height sensor
• Column of aluminium profile and steel with double chain lifting
• Soft start and stop, emergency stop, anti-pressure and anti-fall device under the carriage
• Three-colour LED light and a return to the starting position after every cycle
• 220 V, 50/60 Hz, single phase, 10 A, 1.2 kW; noise 75 dB

SMARTWRAP X2 operation in a working day

The operator should check that the correct film is loaded, the turntable and rollers are clear of debris, and the scale is reading accurately.

How to use the SMARTWRAP X2 pallet wrapper

1. Put the roll of stretch film, 500 mm wide, on the film carriage and thread the film between the rollers.
2. Switch the machine on and choose one of the six programs on the touch screen, or set the turntable speed, the carriage speed and the number of top and bottom wraps for this load.
3. Drive the pallet onto the turntable with a stacker or a pallet truck and attach the end of the film to the load.
4. Press start. The machine weighs the load, turns the pallet and wraps it from the bottom to the top of the load and back, as the program says.
5. Cut the film at the end of the cycle and take the pallet off. The weight is printed on the label.

Settings and maintenance

• Programs. Six programs are stored on the touch screen: the number of wraps at the bottom and at the top, the turntable speed and the carriage speed for each type of load.
• Film tension. Set it for the load: high enough to hold the pallet together, low enough not to crush what is inside.
• Film. Stretch film 500 mm wide and 14 micron thick on a 76 mm core. A thicker film holds more, a thinner one costs less per pallet, the machine takes both.
• Scale. The scale is part of the machine and needs no separate station; check it against a known weight from time to time.
• Maintenance. Switch the machine off before any work. Keep the turntable and the rollers clean of film and dust, and check the chain of the column and the safety devices regularly.

To avoid typical mistakes, ensure the pallet fits fully on the turntable and does not exceed the maximum load. Select the correct wrapping height and film tension for the goods. Check that the label printer has enough labels and is loaded correctly. Keep the area around the machine clear for safe loading and unloading.

Before you order a pallet wrapper

The price on this page depends on the turntable and the wrapping height, so pick them before you order. A few details decide which version suits your dispatch: check them, or send them to us and we will go through them with you.

• Pallet size. The turntable is 1500, 1650, 1800, 2000 or 2200 mm. It has to carry the whole pallet, including anything that sticks out.
• Load height. Wrapping height 2200, 2600 or 3000 mm; the column is 2000, 2400 or 2800 mm high, so a higher wrap also needs a higher ceiling.
• Weight. Up to 2000 kg per pallet. The scale weighs the load during the cycle and the printer puts the weight on a label.
• Power. 220 V, 50/60 Hz, single phase, 10 A, 1.2 kW. An ordinary socket, no compressed air.
• Space. With the 1500 mm turntable and the 2000 mm column the machine measures 2444 × 1500 × 2100 mm and weighs 530 kg. The length is the turntable plus 944 mm, the width is the turntable itself and the height is the column plus 100 mm, so a bigger turntable needs a longer and wider place. Leave room around it for a stacker or a pallet truck.