This item is not in stock. You can reserve it by paying 30% now — delivery in 90 working days. The remaining amount is payable before the goods are dispatched.

Available with 30% deposit · delivery in 90 working days

SKU: 780020

Original price was: 15.599 €.Current price is: 12.799 €.

Price excl. VAT • VAT is added at checkout if no validated VAT number is entered

Available with 30% deposit · delivery in 90 working days

🔒 Secure checkout • PCI‑DSS compliant

    • Delivery Available with 30% deposit · delivery in 90 working days
    • 12-month warranty Register it in the customer portal · service and spare parts from us
    • Returns and complaints No fee if the product is faulty, damaged in transit or not as ordered
    • VAT-free for EU businesses With a valid VAT ID from another EU country
    • CE-compliant Machines from ISO-certified manufacturers
    • Secure payment Card, PayPal or bank transfer

    10,000+ products sold across Europe 30+ years of team experience

    AS-X1012 electric scissor lift

    AS-X1012 is a self-propelled electric scissor lift. It carries two people with their tools to a working position and drives between positions on its own, so nobody moves a ladder or a scaffold tower.

    It reaches a working height of 12 m and a platform height of 10 m, and carries 320 kg in total, of which at most 120 kg on the extension deck. Indoors it takes two people, outdoors one.

    Folded it is 2.40 m long, 1.15 m wide and 1.84 m high with the rails down, so it goes through a factory door and along an aisle. The platform is 2.25 × 1.15 m and slides out by another 1.0 m.

    It runs on batteries: 4 × 6 V, 200 Ah. Drives at 3.2 km/h stowed and at 0.8 km/h with the platform raised, and weighs 2820 kg. Ground clearance is 95 mm folded and 20 mm raised.

     

    Where the AS-X1012 scissor lift is used

    The AS-X1012 is used in warehouses, factories, logistics centres and retail buildings for installation, maintenance and inspection tasks at height. Typical jobs include fitting lighting, running cable trays, installing HVAC ducts, servicing fire protection systems and accessing racking. It is also used in exhibition halls, sports arenas and large commercial spaces where frequent repositioning is needed.

    The platform is suitable for indoor and outdoor work on level, hard surfaces. Indoors, it is often chosen for its compact size and electric drive, which allow it to operate in areas where engine-powered lifts would not be permitted. Outdoors, it is used for facade work, signage, and maintenance, provided wind conditions are within limits and the ground is firm and level.

    Technical specifications

    Model AS-X1012 (JS1012)
    Type Self-propelled electric scissor lift
    Maximum working height 12 m
    Maximum platform height 10 m
    Rated capacity 320 kg
    Extension deck capacity 120 kg
    Occupants 2 indoors, 1 outdoors
    Platform size 2.25 × 1.15 m, extension 1.0 m
    Machine size (L × W) 2.40 × 1.15 m
    Height, rails folded 1.84 m
    Height, guardrail up 2.46 m
    Ground clearance 95 mm stowed, 20 mm raised
    Drive speed 3.2 km/h stowed, 0.8 km/h raised
    Maximum slope, stowed 25 % (14°)
    Maximum work slope 3° forward and back, 1.5° sideways
    Batteries 4 × 6 V, 200 Ah
    Tyres 381 × 129 mm
    Maximum manual force 400 N indoors, 200 N outdoors
    Weight 2820 kg
    Warranty 12 months

     

    What this platform gives you

    • Twelve metres of working height. Roof lights, cable trays, racking and ventilation in a high hall, from a platform with a guardrail instead of a ladder.
    • It drives itself. Self-propelled, with proportional control from the platform, so a position 20 m away is a drive, not a lift and carry.
    • 320 kg on the platform. Two people with tools and material; of those 320 kg, at most 120 kg may be on the extension deck when it is slid out.
    • It fits through the door. 1.15 m wide and 1.84 m high with the rails folded, a standard industrial door, and an aisle it can turn in.
    • Battery, no fumes. Electric drive and lift, so it works inside a hall, a warehouse or a food plant without exhaust.
    • It knows when it is unsafe. A tilt alarm, a pothole guard, limit switches and emergency lowering from the ground are standard, not options.

     

    Equipment

    • Self-propelled electric scissor lift, model JS1012
    • Maximum working height 12 m, platform height 10 m
    • Rated capacity 320 kg, extension deck 120 kg
    • Two people indoors, one outdoors
    • Platform 2.25 × 1.15 m, extension deck 1.0 m
    • Machine 2.40 × 1.15 m, 1.84 m high with the rails folded
    • Overall height 2.46 m with the guardrail up
    • Batteries 4 × 6 V, 200 Ah, lithium 25.6 V / 230 Ah available
    • Drive speed 3.2 km/h stowed, 0.8 km/h raised
    • Maximum slope, stowed 25 % (14°)
    • Ground and platform controls, emergency lowering, tilt alarm, pothole guard
    • Weight 2820 kg
    • 12-month warranty

     

    How a shift with it goes

    1. Inspect the machine before the shift: guardrails, tyres, battery charge, controls and the emergency stop at both stations.
    2. Drive it to the work position with the platform down, at up to 3.2 km/h.
    3. Check that the floor is firm and level, then raise the platform from the platform controls.
    4. Slide the extension deck out where you need the extra reach; its own limit is 120 kg.
    5. Lower the platform before driving further than a step, and put the machine on charge at the end of the shift.

     

    Safety and maintenance

    • Only on firm, level ground. Do not raise the platform anywhere else. If the tilt alarm sounds with the platform up, lower it carefully and move the machine.
    • Outdoors and wind. Outdoors it is a one-person machine and the platform must not be raised when the wind may exceed 12.5 m/s.
    • Never a crane. The machine lifts people with their tools. It must not push, pull or lift loads, and nothing may hang outside the platform.
    • Slopes. The 25 % slope rating applies with the platform down. Raised, it may be driven at 0.8 km/h and no faster.
    • The safety arm. Before anyone works under the raised platform, the safety arm is folded out and the platform lowered onto it.
    • Batteries are ballast. The battery tray must weigh at least 180 kg, each battery 28 kg. Lighter batteries change the machine’s stability and must not be fitted.

     

    Before you order

    The price is on this page. A platform is bought for the height and the door it has to pass, so check these before you order:

    • Working height. 12 m working height, 10 m platform height. Measure from the floor the machine will stand on, not from the ground outside.
    • Door and aisle. 1.15 m wide, 2.40 m long and 1.84 m high with the rails folded. As a compact scissor lift it passes a standard industrial door.
    • Load. 320 kg in total, of which at most 120 kg on the extension deck; two people indoors, one outdoors.
    • Floor. 2820 kg on four wheels. Check the floor loading, especially on an upper storey or a ramp.
    • Indoors or outdoors. Outdoors the platform must stay down above 12.5 m/s of wind, and only one person may be on it.
    • Charging. It needs a socket where it is parked; the batteries are charged after every shift.

    Additional information

    Weight 2900 kg
    Dimensions 1,25 × 2,48 × 2,32 m
    Parameter Specification
    Model

    AS-X1012 (JS1012)

    Type

    Self-propelled electric scissor lift

    Maximum working height

    12 m

    Maximum platform height

    10 m

    Rated capacity

    320 kg

    Extension deck capacity

    120 kg

    Occupants

    2 indoors, 1 outdoors

    Platform size

    2.25 × 1.15 m, extension 1.0 m

    Machine size (L × W)

    2.40 × 1.15 m

    Height, rails folded

    1.84 m

    Height, guardrail up

    2.46 m

    Ground clearance

    95 mm stowed, 20 mm raised

    Drive speed

    3.2 km/h stowed, 0.8 km/h raised

    Maximum slope, stowed

    25 % (14°)

    Maximum work slope

    3° forward and back, 1.5° sideways

    Batteries

    4 × 6 V, 200 Ah

    Tyres

    381 × 129 mm

    Maximum manual force

    400 N indoors, 200 N outdoors

    Weight

    2820 kg

    Warranty

    12 months

    How high does the AS-X1012 reach?

    The platform goes to 10 m and the working height is 12 m, which counts a person standing on the platform.

    How much can it carry?

    320 kg in total, people and material together. Of that, at most 120 kg may be on the extension deck when it is slid out.

    How many people may be on it?

    Two indoors. Outdoors only one, because wind changes the machine's stability.

    Will it go through a factory door?

    It is 1.15 m wide and 1.84 m high with the guardrails folded down, so a standard industrial door is enough. With the rails up it is 2.46 m.

    How fast does it drive?

    3.2 km/h with the platform down and 0.8 km/h with it raised.

    What powers it?

    Four 6 V batteries of 200 Ah. A lithium pack of 25.6 V / 230 Ah is available.

    Can it be used outdoors?

    Yes, with one person on the platform, and the platform must not be raised when the wind may exceed 12.5 m/s.

    How much does it weigh?

    2820 kg. On an upper storey or a ramp the floor loading has to be checked first.

    What has to be checked before every shift?

    Guardrails, tyres, battery charge, both control stations and the emergency stop, and the condition of the floor where the platform will be raised.

    Summary

    • Electric scissor lift, self-propelled
    • Working height 12 m, platform height 10 m
    • Rated capacity 320 kg, extension deck 120 kg
    • Platform 2.25 × 1.15 m, extension 1.0 m
    • Two people indoors, one outdoors
    • 1.84 m high with the rails folded, 1.15 m wide
    • Batteries 4 × 6 V 200 Ah, drive 3.2 km/h
    • Tilt alarm, pothole guard, emergency lowering
    • Weight 2820 kg
    • 12-month warranty

    Brand

    SMITH

    Compliance

    EU Warranty

    Product Documents

    Technical Datasheet (PDF)

    Sign in to download the full technical datasheet.

    User Manual (PDF)

    Accessible to registered customers. Versioned & tracked.

    Product Certificates (PDF)

    Sign in to download the full datasheet and CE certificate.

    SMITH AS-X6 scissor lift

    SMITH AS-X1012 electric scissor lift, working height 12 m, platform 10 m, 320 kg

    Original price was: 15.599 €.Current price is: 12.799 €.

    Available with 30% deposit · delivery in 90 working days

    Available with 30% deposit · delivery in 90 working days

    We Provide High-Quality Goods All Across Europe

    Explore where our products are being used by customers throughout Europe.